濟南變速箱維修人員認為，用戶車輛變速箱出現故障后，由維修站自行解決問題，這是我們通常所說的“維修”，這種方法可以就地解決，但質量得不到保障，如果由于質量再次出現問題，會造成時間上更大的浪費，甚至有時需要更換的零件不能及時到位，造成客戶非常不滿意，這必然會造成對汽車品牌和維修站聲譽的嚴重影響。

Jinan gearbox maintenance personnel believe that after the gearbox of the user's vehicle breaks down, the maintenance station should solve the problem by itself. This is what we usually call "maintenance". This method can solve the problem on the spot, but the quality can not be guaranteed. If the quality problem occurs again, it will cause a greater waste of time, and sometimes the parts that need to be replaced can not be in place in time, causing the customer to be very dissatisfied, This will inevitably have a serious impact on the reputation of automobile brands and maintenance stations.

由變速箱維修廠對變速箱進行“維修”或“再制造”的優勢：

The advantages of "professional maintenance" or "remanufacturing" of the gearbox by a professional gearbox maintenance plant:

A、自動變速箱維修需要大量的設備。自動變速箱由于其結構緊湊，配合精密，技術含量高，所以須依靠專門設備才能對其內部零件進行修復，例如變扭器等部件，另外在每個操作工序也要依賴儀器進行精確檢測，這些儀器設備并不是普通維修站所配備的，

A. Automatic transmission maintenance requires a large number of professional equipment. Because of its compact structure, precise coordination and high technical content, the automatic transmission needs to rely on special equipment to repair its internal parts, such as the torque converter. In addition, it also needs to rely on instruments for accurate detection in each operation process. These instruments and equipment are not provided by ordinary maintenance stations,

B、需要有經驗的高素質人才。由于自動變速箱技術新異，普通修理技工難以掌握，而且接觸機會也很少。而廠配備了這方面高要求的人才，也有很好的學習和培訓機會，對此專項工作能很快積累經驗，保證維修和制造質量，

B. We need experienced and high-quality personnel. Due to the new technology of automatic transmission, it is difficult for ordinary repair technicians to master, and there are few contact opportunities. The professional factory is equipped with highly qualified personnel in this field and has good learning and training opportunities. It can quickly accumulate experience in this special work to ensure the maintenance and manufacturing quality,

C、配件方面。廠很容易配備各種自動變速箱的所有配件，省卻維修的待件時間。另外廠可采購變速箱零件，大大降低維修成本。另一方面，由于每個變速箱故障原因不同，損壞部件也不同，由廠進行整理歸類，可以充分利用變速箱上有用的零部件，節約資源，保護環境。

C. Accessories. Professional factories can easily equip all the accessories of various automatic transmissions, saving the time for maintenance. In addition, professional factories can purchase gearbox parts, greatly reducing maintenance costs. On the other hand, because each gearbox has different fault causes and different damaged parts, it is sorted and classified by a professional factory, which can make full use of the useful parts on the gearbox, save resources and protect the environment.

由變速箱廠對故障變速箱進行“維修”或稱“再制造”。根據客戶要求，當變速箱有故障時，客戶可選擇將變速箱運到廠，維修后再寄回，也可以選擇直接換一個由廠“再制造”的變速箱總成。這個方案在質量和價格上都有保證。更多相關內容就來我們網站http://www.ihudie.cn咨詢吧！

The professional gearbox manufacturer shall carry out "professional maintenance" or "remanufacturing" on the faulty gearbox. According to the customer's requirements, when the gearbox is faulty, the customer can choose to transport the gearbox to a professional factory and send it back after maintenance, or can choose to directly replace the gearbox assembly "remanufactured" by a professional factory. This scheme is guaranteed in quality and price. For more information, please visit our website http://www.ihudie.cn Consult!