漏油 ：

　　Oil leakage:

　　密封件老化或制造工藝不良導致密封不良。

　　Poor sealing caused by aging seals or poor manufacturing processes.

　　頓挫 ：

　　Stuck:

　　電磁閥問題，如電磁閥損壞或油變質。

　　Electromagnetic valve issues, such as damaged solenoid valves or deteriorated oil.

　　變速箱油太臟，導致閥體卡滯。

　　The transmission oil is too dirty, causing the valve body to get stuck.

　　沖擊 ：

　　to attack:

　　離合器片燒蝕或閥體卡滯。

　　The clutch plate is burned or the valve body is stuck.

　　油過臟，導致閥體卡滯。

　　The oil is too dirty, causing the valve body to get stuck.

　　異響 ：

　　Abnormal noise:

　　軸承、風輪盤、差速器、行星架等部件損壞。

　　Components such as bearings, wind turbine discs, differentials, and planetary carriers are damaged.

　　變速箱內部零件磨損或安裝不到位。

　　The internal parts of the gearbox are worn or not installed properly.

　　動力不足 ：

　　Insufficient power:

　　鏈輪損壞。

　　The sprocket is damaged.

　　油泵損壞或油路堵塞。

　　The oil pump is damaged or the oil circuit is blocked.

　　升擋慢 ：

　　Slow upshift:

　　油壓過低或主油路油壓不正常。

　　Low oil pressure or abnormal oil pressure in the main oil circuit.

　　強制降擋開關短路。

　　The forced downshift switch is short circuited.

　　無法啟動 ：

　　Unable to start:

　　鎖止電磁閥損壞或鎖止控制閥發卡。

　　The locking solenoid valve is damaged or the locking control valve is stuck.

　　啟動無力 ：

　　Startup failure:

　　變速箱內部傳感器失效或線路斷路。

　　The internal sensor of the gearbox has failed or the circuit is open.

　　換擋沖擊 ：

　　Shift impact:

　　離合器片燒蝕或閥體卡滯。

　　The clutch plate is burned or the valve body is stuck.

　　油壓過高或液壓系統工作不正常。

　　The oil pressure is too high or the hydraulic system is not working properly.

　　油耗大 ：

　　High fuel consumption:

　　變速箱內部泄漏嚴重。

　　The internal leakage of the gearbox is severe.

　　無倒檔 ：

　　No reverse gear:

　　變扭器損壞或電腦版損壞。

　　The torque converter is damaged or the computer version is damaged.

　　無前進檔 ：

　　No forward gear:

　　后蓋鼓片燒毀或磨片脫落。

　　The back cover drum is burned or the grinding disc falls off.

　　擋位失效、擋位失速、換擋延遲 ：

　　Gear failure, gear stall, gear shift delay:

　　變速箱控制單元損壞或內部傳感器失效。

　　The transmission control unit is damaged or the internal sensors are malfunctioning.

　　自動跳擋 ：

　　Automatic gear shifting:

　　變速箱軟件長時間未升級或控制單元故障。

　　The transmission software has not been upgraded for a long time or the control unit has malfunctioned.

　　通訊不暢 ：

　　Communication is not smooth:

　　變速箱電腦和其他系統電腦的通信有問題。

　　There is a communication issue between the gearbox computer and other system computers.

　　當自動變速箱出現故障時，建議首先進行專業的故障診斷，以確定具體原因。根據故障原因，可以采取相應的維修措施，如更換密封件、清洗閥體、更換損壞的部件等。如果不熟悉自動變速箱的維修，建議將車輛送至專業的維修店進行檢查和維修。

　　When the automatic transmission malfunctions, it is recommended to first conduct professional fault diagnosis to determine the specific cause. According to the cause of the malfunction, corresponding maintenance measures can be taken, such as replacing seals, cleaning valve bodies, replacing damaged components, etc. If you are not familiar with the maintenance of automatic transmissions, it is recommended to take the vehicle to a professional repair shop for inspection and repair.

　　本文由濟南自動變速箱維修提供幫助，更多的相關內容請點擊：http://www.ihudie.cn希望本文能夠?yàn)槟鷰?lái)幫助，感謝您的閱讀！

　　This article is provided with assistance by Jinan Automatic Transmission Maintenance. For more related content, please click: http://www.ihudie.cn I hope this article can be helpful to you. Thank you for reading!