一、全面崩潰
I. Total collapse
崩潰主動變速箱作為修理的一道工序，作為廠同一般修理廠的區別在于完全崩潰，一般修理站崩潰變速箱僅僅對離合組的鋼片、沖突片。
As the first process of repairing, the difference between a professional factory and a general repair factory is that the crash of the active transmission is complete. The crash of the transmission in a general repair station is only for the steel sheet and the conflict sheet of the clutch group.
油泵等比較外圍的環節進行崩潰，但對于、變速箱修理需求做的分化：包含液力變矩器、液壓控制總成油路板、離合器執行元件、差速器等主滾動系統、行星齒輪系統等部分的分化。
Oil pumps and other peripheral links collapse, but for gearbox repair needs to do differentiation: including hydraulic torque converter, hydraulic control assembly oil circuit board, clutch actuator, differential and other main rolling system, planetary gear system and other parts of the differentiation.
分化主動變速箱需求嚴格按照規范的生產工藝進行，任何不歸范的操作都會引起變速箱液壓零部件的損壞。
Differentiated active gearbox needs to be strictly carried out in accordance with the standard production process, any non-standardized operation will cause damage to the hydraulic components of the gearbox.
二、零件清洗
Part Cleaning
零件的清潔是修理中十分重要的環節，這是由于主動變速箱零件只要在完全潔凈的前提下才能夠進行準確的測量、查看細微的塤壞，以斷定零件的磨損是否已經超支，還有變速箱是在完全關閉的箱體內部來作業的，任何細微的雜質都會影響變速箱的作業功能。
Parts cleaning is a very important link in repairing. This is because active gearbox parts can only be accurately measured and inspected under the premise of complete cleanliness, to determine whether the wear of parts has been overrun, and the gearbox is operating inside the fully closed box body. Any minor impurities will affect the operation function of the gearbox.
零部件需求通過火油清洗、超聲波清洗、高溫清洗、壓縮空氣吹干，四項工藝才能夠完結。
Parts and components need to be cleaned by oil, ultrasonic, high temperature cleaning, compressed air drying, the four processes can be completed.
三、零件檢測
Part Testing
零件清洗今后就需求對零件進行檢測，判斷零件的磨損是否已經超支，此步驟的原則是既不能漏掉一個零件，也不能放過一個超支的部件。
The principle of this step is that neither one part can be omitted nor one over-expended part can be released.
橡膠密封類零件需求完全拋棄。沖突材料需求完全替換。油品需求完全拋棄。調整類零件需求完全替換。
Rubber sealing parts need to be completely abandoned. Conflicting material needs to be completely replaced. Oil demand is completely abandoned. Adjustment parts need to be completely replaced.
液力變鈕器需求崩潰，對內部每個零件檢測，過濾網需求完全替換，電磁閥等電子元件需求完全檢測，軸承超過運用壽命的需求完全替換，其他零件別離按照零件規范進行逐一的檢測。
Hydraulic button changer needs collapse, for each part of the internal testing, filter screen needs to be completely replaced, solenoid valves and other electronic components need to be fully tested, bearings over the service life of the need to be completely replaced, other parts are separated from one by one in accordance with the specifications of the parts.
The above information is our Jinan automatic transmission maintenance and distribution, I hope we can all like our website is: http://www.ihudie.cn!
